Paul Wood's GeoCities Tribute Page

Research Outputs

Title	Authors	Published In	DOI
Mechanical Behavior of 3D-Printed Zig-Zag Honeycomb Structures Made of BASF Ultrafuse 316L	Wood, P., Sarzynski, M., Platek, P., Cedro, P., Gunputh, U. and Rusinek, A.	Materials.17 (24)	10.3390/ma17246194
Fatigue Damage Evolution in SS316L Produced by Powder Bed Fusion in Diferent Orientations with Reused Powder Feedstock	Wood, P., Kopec, M., Gunputh, U., Williams, G., Macek, W. and Kowalewski, Z.L.	Experimental Mechanics.	10.1007/s11340-024-01118-1
A module layout design tool for off-site factory construction: Reactor Auxiliary balance of plant systems case study	Wood, P., Wrigley, P., Robertson, D., O'Neill, S. and Hall, R.	Progress in Nuclear Energy.177	https10.1016/j.pnucene.2024.105411
Enhancing robotics learning using imitation learning through visual-based behaviour cloning	Jadeja, Y., Shafik, M., Wood, P. and Makkar, A.	21st International Conference on Manufacturing Research.	10.1051/matecconf/202440112006
Architecture influence on acoustic performance, EMI shielding, electrical and thermal, properties of 3D printed PLA/graphite/molybdenum disulfide composites	Wood, P., Łapińska, A, Grochowska, N, Cieplak , K., Płatek, P., Deuszkiewicz , P., Dużyńska, A., Sztorch, B., Głowcka, J., Przekop, R., Jóźwik, J., Gołofit, T. and Plichta, A.	Materials & Design.245	10.1016/j.matdes.2024.113241
Experimental identification of yield surface for additively manufactured stainless steel 316L under tension–compression-torsion conditions considering its printing orientation	Kopec, M., Dubey, V. P., Pawlik, M., Wood, P. and Kowalewski, Z. L.	Manufacturing Letters.41, pp. 28-32	10.1016/j.mfglet.2024.07.003
Mechanical Properties of Eco-Friendly, Lightweight Flax and Hybrid Basalt/Flax Foam Core Sandwich Panels	Marzena Pawlik, Urvashi Gunputh, Daniel Odiyi, Sarah Odofin, Huirong Le, Paul Wood, Angelo Maligno and Yiling Lu	Materials.17 (15), pp. 1-14	10.3390/ma17153842
Comparing Bio-Ester and Mineral-Oil Emulsions on Tool Wear and Surface Integrity in Finish Turning a Ni-Based Superalloy	Paul Wood, Fathi Boud, Andrew Mantle, Wayne Carter, Syed Hossain, Urvashi Gunputh, Marzena Pawlik, Yiling Lu, José Díaz-Álvarez and María Henar Miguélez	Lubricants.12 (5), pp. 1-22	10.3390/lubricants12050164
Cover story for Lubricants issue 'Clean coolants to decarbonise the manufacturing of hard alloys'	Wood, P.	MDPI.
Thin-walled LPBF-manufactured Inconel 718 honeycomb structures: Multiscale characterization	Wood, P.	in: Zikry, M, A. (ed.) Innovative Lightweight and High-Strength Alloys: Multiscale Integrated Processing, Experimental, and Modeling Techniques Amsterdam Elsevier.
Microstructure Evolution in AM Produced Superalloy Thin Struts at Low Plastic Strain	Delcuse, L, Bahi, S., Gunputh, U., Ben Haj Slama, A., Guitton, A., Rusinek, A., Maloufi, N., Williams, G. and Wood, P.	Materials Today Communications.39, pp. 1-10	10.1016/j.mtcomm.2024.108739
Orientation effects on the fracture behaviour of additively manufactured stainless steel 316L subjected to high cyclic fatigue	Kopec, M., Gunputh, U., Macek, W., Kowalewski, Z. L. and Wood, P.	Theoretical and Applied Fracture Mechanics.130, pp. 1-9	10.1016/j.tafmec.2024.104287
Effect of Powder Bed Fusion Laser Sintering on Dimensional Accuracy and Tensile Properties of Reused Polyamide 11	Gunputh, U., Williams, G., Pawlik, M., Lu, Y. and Wood, P.	Polymers.	10.3390/polym15234602
Prediction of carbon nanotubes reinforced interphase properties in fuzzy fibre reinforced polymer via inverse analysis and optimisation	Pawlik, M., Le, H., Wood, P. and Lu, Y.	Computational Material Science.231, pp. 1-11	10.1016/j.commatsci.2023.112548
Modular reactors: What can we learn from modular industrial plants and off site construction research	Paul Wrigley, Paul Wood, Daniel Robertson, Jason Joannou, Sam O'Neill and Richard hall	Nuclear Engineering and Technology.56 (1), pp. 1-11	10.1016/j.net.2023.07.023
Long Sump Life Effects of a Naturally Aged Bio-Ester Oil Emulsion on Tool Wear in Finish Turning a Ni-Based Superalloy	Paul Wood, Andrew Mantle, Fathi Boud, Carter, W., Gunputh, U., Pawlik, M., Lu, Y., José Díaz-Álvarez and María Henar Miguélez Garrido Long Sump Life Effects of a Naturally Aged Bio-Ester Oil Emulsion on Tool Wear in Finish Turning a Ni-Based Superalloy	Metals.	10.3390/met13091610
Characterisation of impact resistance of composite reinforced by hybridised carbon-flax fibres in polyfurfuryl alcohol resin	Lu, Y., Pawlik, M., Ganapathi, S. P., Wood, P., Gunputh, U. and Le, H.	The 2nd International Conference on Mechanical Automation and Engineering Materials (MAEM 2023) .IOP Publishing.	10.1088/1742-6596/2612/1/012013
Microstructure Effects on the Machinability of AM-Produced Superalloys	Wood, P., Díaz-Álvarez, J., Lu, Y., Rusinek, A., Gunputh, U., Bahi, S., Díaz-Álvarez, A., Miguélez, M. H., Lu, Y., Platek, P. and Sienkiewicz, J.	Crystals.13 (8), pp. 1-16	10.3390/cryst13081190
Microstructure and geometry effects on the compressive behavior of LPBF-manufactured inconel 718 honeycomb structures	Voyiadjis, G. z., Znemah, R. A. and Paul Wood	Journal of Materials Research and Technology.24, pp. 1562-1578	10.1016/j.jmrt.2023.03.093
Effect of Grain Structure on Machinability of LPBF Inconel 718: A Critical Review	Hama, J., Gunputh, U., Lu, Y., Wood, P. and Alvarez, J.	20th International Conference on Manufacturing Research, Incorporating the 37th National Conference on Manufacturing Research.IOS Press.	10.3233/ATDE230896
Low cycle fatigue predictions of a space thruster built with a new refractory high entropy alloy	Valvano, S., Canale, G., Maligno, A. and Wood, P.	The Fourth International Conference on Damage Mechanics, Baton Rouge, Louisiana, USA, MAY 15 18, 2023.
On the Lubricity and Comparative Life Cycle of Biobased Synthetic and Mineral Oil Emulsions in Machining Titanium Ti-6Al-4V at Low Cutting Speed	Wood, P., Boud, F., Carter, W., Varasteh, H., Gunputh, U., Pawlik, M., Clementson, J., Lu, Y. and Hossain, S.	Journal of Manufacturing and material processing.6 (6), pp. 1-16	10.3390/jmmp6060154
Design and Manufacture of One-Size-Fits-All Healthcare Face Shields for the NHS During the COVID-19 Pandemic	Gunputh, U., Williams, G., Leighton, A., Carter, W., Varasteh, H., Pawlik, M., Lu, Y., Sims, R., Lyons, M., Clementson, J., Tripathi, G., Nick Chambers, Matt Roe and Wood, P.	SSRN Electronic Journal.	10.2139/ssrn.4258668
Surface engineering of carbon fibre/epoxy composites with woven steel mesh for adhesion strength enhancement	Pawlik, M., Cheah, L.Y.Y, Gunputh, U., Le, H., Wood, P. and Lu, Y.	International Journal of Adhesion and Adhesives.114, pp. 1-8	10.1016/j.ijadhadh.2022.103105
Computer Aided Design of Self-Learning Robotic System using Imitation Learning	Jadeja, Y., Shafik, M. and Wood, P.	Proceedings of the 19th International Conference on Manufacturing Research, Incorporating the 36th National Conference on Manufacturing Research.IOS Press.	10.3233/ATDE220564
Simple shear behavior of 2024-T351 aluminum alloy over a wide range of strain rates and temperatures: Experiments and constitutive modeling	Bin Jia, Alexis Rusinek, Xinke Xiao and Paul Wood	International Journal of Impact Engineering.	10.1016/j.ijimpeng.2021.103972
High strain rate effect on tensile ductility and fracture of AM fabricated Inconel 718 with voided microstructures	Wood, P., A. Rusinek, P. Platek, Jacek Janiszewski, J. Sienkiewicz, Gunputh, U., K. Rajkowski and M.H. Miguélez	Materials & Design.	10.1016/j.matdes.2021.109908
Simple shear behavior and constitutive modeling of 304 stainless steel over a wide range of strain rates and temperatures	B. Jia, A. Rusinek, R. Pesci, R. Bernier, S. Bahi, A. Bendarma and Wood, P.	International Journal of Impact Engineering.	10.1016/j.ijimpeng.2021.103896
Strain Rate and Temperature Effects in Nanoindentation Testing on Hardness in Selective Laser Melting IN718	Reem Abo Znemah, George Z. Voyiadjis, Paul Wood and Edris Akbari	Journal of Engineering Materials and Technology.	10.1115/1.4051691
Off-site modular construction and design in nuclear power: A systematic literature review	Wood, P., Wrigley, P., O'Neill, S., R. Hall and D. Robertson	Progress in Nuclear Energy.	10.1016/j.pnucene.2021.103664
An Industrial Self-Learning Robotic Platform Solution for Smart Factories Industrial Applications Using Machine and Deep Imitation Learning	Jadeja, Y., Shafik, M., Wood, P. and Stella, L.	in: Shafik, M. and Case, K. (ed.) Advances in Manufacturing Technology XXXIV Amsterdam, Netherlands IOS Press. pp. 119-124
Selective laser melting of a high precision turbomachinery application in IN718 alloy	Wood, Paul, Gunputh, Urvashi, Williams, Gavin, Carter, Wayne, Boud, Fathi, Bahi, Slim, Rusinek, Alexis, Kowalewski, Zbigniew, Nowak, Zdzisław, Libura, Tomasz, Voyiadjis, George, Diaz-Alvarez, Jose and Miguelez, María
Analysis of machining performance of Inconel 718 printed by PBF-LM (powder bed fusion laser melting)	Diaz-Alvarez, A, Diaz-Alvarez, J, Wood, P, Gunputh, U, Rusinek, A and Miguelez, M
Machinability of INCONEL718 alloy with a porous microstructure produced by laser melting powder bed fusion at higher energy densities	Wood, Paul K, Díaz-Álvarez, Antonio, Díaz-Álvarez, José, Miguélez, María Henar, Rusinek, Alexis, Williams, Gavin, Bahi, Slim, Sienkiewicz, Judyta, Płatek, Paweł, Gunputh, Urvashi Fowdar and wood, paul	Materials.13 (24).	10.3390/ma13245730
A novel technique for dynamic shear testing of bulk metals with application to 304 austenitic stainless steel	Jia, B., Rusinek, A., Pesci, R., Bernier, R., Bahi, S. and Wood, P.	International Journal of Solids and Structures.204-205, pp. 153-171	10.1016/j.ijsolstr.2020.08.019
Effect of element wall thickness on the homogeneity and isotropy of hardness in SLM IN718 using nanoindentation	Abo Znemah, Reem, Wood, Paul, Gunputh, Urvashi Fowdar and Zhang, Cheng	Mechanics Research Communications.	10.1016/j.mechrescom.2020.103568
Effect of powder bed fusion laser melting process parameters, build orientation and strut thickness on porosity, accuracy and tensile properties of an auxetic structure in IN718 alloy	Bahi, S., Gunputh, U., Rusinek, A., Wood, P. and Miguelez, M.H.	Additive Manufacturing.36, p. 101339	10.1016/j.addma.2020.101339
Influences of horizontal and vertical build orientations and post-fabrication processes on the fatigue behavior of stainless steel 316l produced by selective laser melting	Wood, Paul, Libura, Tomasz, Kowalewski, Zbigniew L., Williams, Gavin and Serjouei, Ahmad	Materials.12 (24), p. 4203	10.3390/ma12244203
Additive manufacturing of graded structures in IN718	Wood, Paul and Gunputh, Urvashi
Selective laser melting of stainless steel 316L pressure fittings	Wood, Paul
Module layout optimization using a genetic algorithm in light water modular nuclear reactor power plants.	Wrigley, P.A., Wood, P., Stewart, Paul and Robertson, D.	Nuclear Engineering and Design.	10.1016/j.nucengdes.2018.10.023
Module layout optimization using a genetic algorithm in light water modular nuclear reactor power plants.	Wrigley, P., Wood, Paul, Stewart, Paul, Hall, Richard and Robertson, D.	Nuclear Engineering and Design.	10.1016/j.nucengdes.2018.10.023
Analysis of parameters influencing build accuracy of a SLM printed compressor outlet guide vane	Otubusin, Adetayo, Wood, Paul, Appleby, John and Adamczuk, Rafael	American Society of Mechanical Engineers.	10.1115/GT2018-75548
Design for plant modularisation: nuclear and SMR.	Wrigley, Paul, Wood, Paul, Stewart, Paul, Hall, Richard and Robertson, Dan	2018 26th International Conference on Nuclear Engineering Conference Proceedings.	10.1115/ICONE26-81760
Mechanical properties and microstructure of AZ31B magnesium alloy processed by I-ECAP.	Gzyl, Michal, Rosochowski, Andrzej, Pesci, Raphael, Olejnik, Lech, Yakushina, Evgenia and Wood, Paul	Metallurgical and Materials Transactions A.	10.1007/s11661-013-2094-z

About Me
Director of IISER
Research Institute
College of Science and Engineering

Visitor Counter

ORCID
https://orcid.org/0000-0002-9030-6868