Welcome to the HydroStor® Chamber Page! Check out our new products!

HydroStor® Chamber

High performance stormwater storage chambers

Product Type: Chamber

Prinsco offers four sizes of high-performance HydroStor® stormwater chambers designed for site-specific applications such as parking lots, roadways, and commercial developments. HydroStor chambers provide an environmentally sustainable underground water management system that optimizes groundwater recharge and saves valuable land resources. Our four storm chamber models are designed to fit almost any type of performance specifications, project footprint, and construction budget.

Prinsco’s chamber systems can be easily modeled with the HydroCAD Stormwater Modeling System and the Civil 3D Auto CAD Module. Both tools simplify the process of designing a system meeting specific storage and footprint requirements.

Contact your Prinsco sales rep to learn more about HydroStor® Chamber.



Related Applications Projects Features Sizes Standards Resources Performance

High performance polypropylene material

Meets or exceeds ASTM F2418 product standard & ASTM F2787 design standard

Meets AASHTO H20 live load & HL93 design load requirements

Advanced injection molding technology for maximum structural performance


System Design

Maximum land utilization & minimal environmental impact

Smaller footprint with lower installed cost than similar chambers

Features integral connectors for simplified assembly

Design tool available at Prinsco.com/HydroStor-Resources


Available as part of a complete solution with end caps, pipe manifolds & pretreatment options


Handling

Integrated Handles for safe on-site handling

Sturdy and lightweight for safe transport and placement by 2 people

Specially designed pallet for trouble free handling

Maximum stacking density to reduce on-site staging footprint


Available Sizes


HS290 HS180 HS75 HS31
Installed Storage Capacity* 164.5 ft3/chamber 176 ft3/chamber 75 ft3/chamber 31.2 ft3/chamber
Height 59.5″ 45.5″ 29.7″ 16″
Width 100.5″ 77.8″ 51″ 34″
Unit Length 51.8″ 88.7″ 87.1″ 87.3″
Installed Length 48.3″ 85.3″ 84.9″ 85.5″
Weight 122 lbs 122 lbs 69 lbs 34 lbs
Chambers/Pallet 10 19 33 90
Material Polypropylene Polypropylene Polypropylene Polypropylene
Mfg. Process Injection Molding Injection Molding Injection Molding Injection Molding
Special Features Integrated Handles Integrated Handles Integrated Handles Integrated Connectors

* Assuming 40% void volume of backfill with 9″ bedding & 12″ cover for HS290 & HS180 and 6″ bedding & 6″ cover for HS75 & HS31


Installation Specifications


HS290 HS180 HS75 & HS31
Backfill Above Chamber 12″ min. 12″ min. 6″ min.
Bedding 9″ min. 9″ min. 6″ min.
Chamber Spacing 8.5” 5” 6”
Backfill at Edge of System 12″ 12″ 12″
Minimum Cover 24” 18″ 18″
Maximum burial Depth 8′ 8′ 8′

Meets or exceeds ASTM F2418 product standard

Meets or exceeds ASTM F2787 design standard

Meets AASHTO H20 live load requirement

Meets AASHTO HL93 design load requirement



Product Brochures



Specifications



Calculators



Installation Guides



CAD Drawings